[ Select Operating System ] If you select your Operating System(just once), and then you can download a driver for your Operating System. If there is a service pack for your Operating System, I recommend install the service pack before install your driver. May 28, 2011 I have an Asus P6X58D Premium Mobo, with at SATA III controller in it as well, its a Marvell controller, not sure what model though, I recently bought a Corsair Performance 3 SSD SATA III, hooked up to the SATA III controller on my mobo WITH a SATA III cable, and I am still only getting SATA II seq r/w speeds. 88SE14xx PCIe 3.0 to 6Gb/s SATA Host Controllers. The Marvell 88SE14xx family of PCIe to SATA 6Gb/s host controllers offers an ideal cost effective solution for connecting Serial ATA (SATA) peripherals to a PCI Express (PCIe) 3.0 host, delivering up to 8GB/s bandwidth. Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. 6/19/2014) In Windows 10, the driver for the.
If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones.
Important Notes
- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- Print out these instructions for use as a reference during the installation process.
About SATA / AHCI / RAID Driver:
When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.
Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.
To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.
So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.
- COMPATIBLE WITH:
- Windows 10
Windows 10 64 bit - file size:
- 468 MB
- filename:
- 1.2.0.1049_n4k_win10_whql.zip
- CATEGORY:
- Motherboard
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver.
Problems can arise when your hardware device is too old or not supported any longer.
DVD Writer will not recognise blank disc in drive. Marvell 91xx SATA 6G controller not listed in Device Manager.
Select drive in explorer caused drive to open, requesting insert disc. When closed an attempt to read seems to be made but stops.
Drive can read and play CD and DVD files. Problem appears to stem from installation of Windows 10.
Initially Marvell 91xx SATA 6G Controller properties stated: 'This device cannot start (Code 10). An I/O adapter hardware error has occurred.'
Latest driver is installed, roll back not available.
Troubleshooter unable to fix.
Events log shows device deleted/configured/not started on 13/08/16, 17/08/16, 2/09/16.
All attempts to repair unsuccessful.
Noted neither drive nor controller are listed on Windows 10 compatibility list.
Also noted: Application failures occurring on a daily basis since 20/08/16, including a windows shutdown unexpectedly on 1/09/16. Windows 10 first installed on 13/08/16. An update on 20/08/16 & cumulative update on 24/08/16.
Driver installed was 1.2.0.1248. confirmed by windows as correct. Noted 1.2.0.1047 recommended by others.
Uninstalled and removed driver. But this deleted the Marvell 91xx SATA 6G controller from device manager. Restoration of backup driver from Drivermax did not restore Marvell driver to the listing or drive function.
Run Windows diagnostic hardware trouble shooter found 2 issues which were fixed.
After reboot still no Marvell controller in device manager and only 1 MS storage controller where there previously were 2.
Have no W10 install disc but will try W10 repair disc and then if that fails reinstall W10Upgrade28084 first installed 13Aug.
Marvell 91xx Sata 6g Controller Driver Windows 10 64 Bit
What is wrong and how can it be fixed?
System Information Report
MB: Gigabyte Model H61M-USB3-B3 REV 2.0
Physical Memory (RAM) 8.00 GB
BIOS Award SMBIOS Version 2.4 FF, 27/03/2012
[CD-ROM]
Marvel Sata 6g Controller Driver Windows 7
Item Value
Drive E:
Description CD-ROM Drive
Media Loaded No
Media Type DVD Writer
Name HL-DT-ST DVDRAM GH24NS70
Manufacturer (Standard CD-ROM drives)
Status OK
Transfer Rate -1.00 kbytes/sec
SCSI Target ID 0
PNP Device ID SCSICDROM&VEN_HL-DT-ST&PROD_DVDRAM_GH24NS704&F58E17D&0&050000
Driver c:windowssystem32driverscdrom.sys (10.0.14393.0, 169.00 KB (173,056 bytes), 16/07/2016 11:41 PM)
[SCSI]